2004-2008 Nissan Maxima SE, SL - Joint torique d'étanchéité de boîtier de filtre de refroidisseur d'huile 6 cyl 3.5L 21304-JA11A Générique

€15,77

SKU: C140-A006~008

Livraison rapide et gratuite

Transactions sécurisées et fiables

Joint d'étanchéité de boîtier de filtre de refroidisseur d'huile O-ring 21304-JA11A pour Nissan Armada Titan

Caractéristique :
1 : Selon les spécifications d'origine de l'usine, correspond parfaitement à la voiture d'origine.
2 : Posséder différentes machines de test pour concevoir des paramètres précis et exacts pour nos produits. Tous les interrupteurs ont été testés pour leur performance.
3 : Fabriqué avec des matériaux de haute qualité, léger, antirouille, inaltérable et durable.
4 : Produit de rechange de qualité supérieure.
5 : Performance stable, haute fiabilité, convient pour remplacer votre pièce cassée.

Spécificités :
État : 100 % neuf
Matériau : Caoutchouc
Couleur : Comme indiqué sur les images
Numéro de pièce du fabricant : 21304-JA11A
Numéro de pièce d'échange : 21304JA10A B130443U00
Autre numéro de pièce : 21304-JA11A
Type : Joint d'étanchéité de refroidisseur d'huile
Taille : Comme indiqué sur l'image
(Veuillez permettre un écart de mesure de 1 à 3 mm en raison de la mesure manuelle.)

Compatibilité :
Pour Nissan 350Z 350Z, Base, Enthusiast, GT, Touring, Track de 2003 à 2007 - 6 cylindres 3.5L
Pour Nissan Altima de 2005 à 2016 MOTEURS 3.5L UNIQUEMENT
Pour Nissan Armada LE, LE/SL, Platinum, SE, SE/SV de 2007 à 2015 - 8 cylindres 5.6L
Pour Nissan Frontier de 2005 à 2016 MOTEUR 2.5L UNIQUEMENT
Pour Nissan Maxima SE, SL de 2004 à 2008 - 6 cylindres 3.5L
Pour Nissan Murano LE, LE/TOIT, S, SE, SL, SL/TOIT, SV de 2003 à 2014 - 6 cylindres 3.5L
Pour Nissan NV de 2013 à 2015 Ceci s'appliquera uniquement au modèle NV200 et ne conviendra pas à la série NV plus grande
Pour Nissan Pathfinder de 2008 à 2014 MOTEUR V8 5.6L UNIQUEMENT
Pour Nissan Quest Base, LE, S, SE, SL, SV de 2004 à 2016 - 6 cylindres 3.5L
Pour Nissan Titan LE, Off-Road, PRO-4X, S, SE, SL, SV, XE de 2007 à 2015 - 8 cylindres 5.6L
Pour Nissan Versa SEDAN de 2012 à 2015 AVEC MOTEUR 1.6L UNIQUEMENT
Pour Nissan Versa Note S/Low, SL/Mid, SR, SV de 2014 à 2016 - 4 cylindres 1.6L

L'ensemble comprend :
1 joint d'étanchéité de refroidisseur d'huile
(le manuel d'instructions n'est pas inclus.)

Remarque :
1. Veuillez vérifier la description ou utiliser le vérificateur d'année/marque/modèle et remplacer les numéros de pièce pour confirmer la compatibilité avant d'acheter.
2. Une installation professionnelle est recommandée.


Informations de livraison :
Délai de livraison : 3-8 jours ouvrables.
Expédition rapide gratuite depuis la Californie.

Customer Reviews

Based on 906 reviews
95%
(862)
2%
(19)
1%
(5)
0%
(1)
2%
(19)
G
George Landers

Gaskets fit perfectly and included 2 sets for the intake manifold. I did not use the paper kind. Headgasket is holding up. I also used the exhaust and oil pump gaskets. They fit well.
Flanged bolt heads come with this kit and simply won't work. The valve spring guards within the cylinder head (KA24DE) won't allow them to fall down and seat. See picture/video. That was a major issue for me but the company read my original review and did everything they could to make sure I was taken care of and I really appreciate that.

Z
Zackery Reynolds

great value for the money. everything functions I had no problem with the fit went right on.

J
Jose Hernandez

Who would have thought that with a kit from Amazon, a video on the internet, and a little help from the neighbors cat you would be able to rebuild a transmission at home. My 2004 Suburban has been back on the road for several months now. Advise: Getting the top bolts out of the engine is easier if you lower the transmission a lot. Put everything in bags and lay them out in the order they were removed. Reinstall in the reverse order. Make sure the torque converter seats in properly. It should drop in three times. If it doesn't you will be taking everything apart again. Verify the torque converter to flex plate spacing. If your transmission drain plug is stuck, weld a large nut onto it and use an impact wrench (after you have removed the pan and it is not full of oil).

R
Röschel Reiner

My husbands work car transmission too a poop. My dad told me to order this and he would rebuild it. Worked great! Had everything he needed. Was packaged nicely, and received quickly

c
chris olenchock
Never got them

Im.still waiting on them