Capteur de vitesse de roue ABS arrière gauche et droite 4670A583,4670A584 Mitsubishi Lancer Générique
€30,77
SKU: C200-A017-Kit
Livraison rapide et gratuite
Transactions sécurisées et fiables
Caractéristique:
1: Selon les spécifications d'usine d'origine, correspond parfaitement à la voiture d'origine.
2: Posséder différentes machines d'essai pour concevoir des paramètres exacts et précis pour nos produits. Tous les produits ont été testés pour la performance.
3: Fabriqué en matériau de haute qualité, léger, antirouille, inaltérable et durable. (Prix direct d'usine sans majorations intermédiaires)
4: Produit de rechange de qualité supérieure.
5: Performance stable, haute fiabilité, convient pour remplacer votre pièce cassée.
Spécifications:
Condition: Tout Neuf
Garantie: 1 An
Numéro de pièce du fabricant: 4670A157, 4670A583, 4670A158, 4670A584
Montage:
Pour MITSUBISHI LANCER 2009-2010 Ralliart
Pour MITSUBISHI LANCER 2013-2014 Ralliart
Pour MITSUBISHI OUTLANDER 2007-2009 V6 3.0L
Pour MITSUBISHI OUTLANDER 2010-2011 avec 7
Pour MITSUBISHI OUTLANDER SPORT 2011 avec 7
Emballage inclus:
2 * Capteur de vitesse ABS (4670A583+4670A584)
Informations sur la livraison:
Délai de livraison: 3-8 jours ouvrables.
Livraison rapide et gratuite depuis la Californie.
Customer Reviews
Gaskets fit perfectly and included 2 sets for the intake manifold. I did not use the paper kind. Headgasket is holding up. I also used the exhaust and oil pump gaskets. They fit well.
Flanged bolt heads come with this kit and simply won't work. The valve spring guards within the cylinder head (KA24DE) won't allow them to fall down and seat. See picture/video. That was a major issue for me but the company read my original review and did everything they could to make sure I was taken care of and I really appreciate that.
great value for the money. everything functions I had no problem with the fit went right on.
Who would have thought that with a kit from Amazon, a video on the internet, and a little help from the neighbors cat you would be able to rebuild a transmission at home. My 2004 Suburban has been back on the road for several months now. Advise: Getting the top bolts out of the engine is easier if you lower the transmission a lot. Put everything in bags and lay them out in the order they were removed. Reinstall in the reverse order. Make sure the torque converter seats in properly. It should drop in three times. If it doesn't you will be taking everything apart again. Verify the torque converter to flex plate spacing. If your transmission drain plug is stuck, weld a large nut onto it and use an impact wrench (after you have removed the pan and it is not full of oil).
My husbands work car transmission too a poop. My dad told me to order this and he would rebuild it. Worked great! Had everything he needed. Was packaged nicely, and received quickly
Im.still waiting on them